BETA SPECIFICATION DEMONSTRATION. NOT FOR SALE. This page uses genuine manufacturer specifications to demonstrate an AMFLOW TL Carbon product description. The A/B options and displayed AUD 100/AUD 120 prices are synthetic test data, not AMFLOW configurations or retail prices; no stock is available and purchasing is disabled.
The six gallery images are generic AI-generated lifestyle illustrations. They do not depict the AMFLOW TL Carbon, its frame, components, colour or included equipment, and must not be used to identify the actual product.
The AMFLOW TL Carbon combines a carbon frame, an Avinox M2 mid-drive motor and a removable 800Wh battery with FOX suspension offering 120mm front and 105mm rear travel (AMFLOW Australia overview). Its standard equipment includes mudguards, front and rear lights, a MIK HD-compatible rear rack and a kickstand, making it a model to consider for everyday riding and equipped touring rather than a bare-bones trail-bike build (AMFLOW Australia specifications).
Amflow positions the TL Carbon for commuting, touring and appropriately configured trail use, but those uses have different equipment and load limits (AMFLOW Australia overview). In particular, the approximately 200kg system-weight figure is not its off-road allowance; Amflow specifies a lower 125kg total-weight limit for the prepared Category 3 configuration (AMFLOW Australia riding limits).
The Avinox M2 is specified at 110Nm nominal torque and 125Nm peak torque, with a 2-inch OLED display and wireless controllers on both sides of the handlebar (AMFLOW Australia specifications). Amflow's Australian information lists 250W rated power, up to 1100W peak output and a 25km/h assistance limit; peak output is not the continuous rated power, and output depends on the configuration and system conditions (AMFLOW Australia FAQ).
The TRP E.A.S.I. electronic rear derailleur is paired with a 10-speed, 11–43T cassette and a 38T chainring (AMFLOW Australia specifications). SmoothShift uses the drive system to assist shifting without pedalling, but requires the factory-compatible derailleur and communication cable, suitable firmware and the feature enabled on the display (AMFLOW Australia overview, SmoothShift requirements).
An 800Wh removable battery is standard; a 600Wh battery and a 480Wh secondary battery are optional, with the 800Wh plus 480Wh combination providing up to 1280Wh total capacity (AMFLOW Australia battery options). The secondary battery is not included in the standard specification, so the standard model should not be described as a 1280Wh bike (AMFLOW Australia battery options).
Amflow quotes up to 172km from the 800Wh battery in a controlled test: flat paved road, an 80kg rider, Eco mode, 65rpm cadence, 21km/h and default assistance settings (AMFLOW Australia range test). This is not a guaranteed touring distance; temperature, wind and other riding conditions affect real-world range (AMFLOW Australia range test).
The standard build pairs FOX AWL Sport and FLOAT Rhythm suspension with a high-rise touring handlebar, dropper seatpost, 27.5-inch wheels and 2.35-inch Maxxis Crossmark II tyres (AMFLOW Australia specifications). It also uses four-piston Tektro hydraulic disc brakes with 180mm rotors; the original wheelset is not approved by Amflow for tubeless conversion (AMFLOW Australia specifications, AMFLOW Australia FAQ).
For lifting and transport planning, use the equipped weights: 25.52kg for S/M and 25.95kg for L/XL (AMFLOW Australia weight information). The lower 22.6kg S/M and 22.9kg L/XL figures are measured with the front and rear mudguards, lights, pedals and rear rack removed; weights can vary by the actual bike (AMFLOW Australia weight information).
These are manufacturer-reference specifications, checked on 13 October 2026 using Amflow's Australian pages. They describe the TL Carbon, not the generic bicycles shown in this beta gallery.
| Component | Manufacturer specification |
|---|---|
| Frame and finish | Full-carbon, full-suspension AMFLOW TL Carbon frame; Silica Beige (AMFLOW specifications). |
| Motor and torque | Avinox M2 mid-drive; 110Nm nominal torque, 125Nm peak torque (AMFLOW specifications, AMFLOW FAQ). |
| Power and Australian assistance limit | 250W rated; up to 1100W peak with the specified RS800/firmware configuration; Australian assistance limit 25km/h, as stated by the manufacturer (AMFLOW FAQ). |
| Standard battery | Removable Avinox RS800, 800Wh (AMFLOW specifications, AMFLOW overview). |
| Optional battery capacity | Separate 600Wh battery; optional 480Wh secondary battery; maximum 1280Wh with 800Wh + 480Wh (AMFLOW overview). |
| Display and controls | Avinox DPC100 2-inch OLED control display; two Avinox wireless controllers (AMFLOW specifications). |
| Standard charger | Avinox 4A charger, 168W output (AMFLOW specifications). |
| Front suspension | FOX AWL Sport; 120mm travel; RAIL 2.0 damper; LSR adjustment; 15 × 110mm Kabolt axle; 44mm offset (AMFLOW specifications). |
| Rear suspension | 105mm rear-wheel travel; FOX FLOAT Rhythm, LSR adjustment, TL-specific tune; 190 × 45mm shock (AMFLOW overview, AMFLOW specifications). |
| Rear derailleur | TRP E.A.S.I. RD-T7010E-L electronic derailleur, compatible with 10/11-speed; supplied drivetrain is 10-speed (AMFLOW specifications). |
| Cassette and chainring | CS-M5243 10-speed cassette, 11–43T; Avinox direct-mount 38T chainring (AMFLOW specifications). |
| Chain and cranks | Avinox eGlide T chain, 10S/11S, 118 links; Avinox SL cranks, 155mm S/M or 160mm L/XL (AMFLOW specifications). |
| Brakes and rotors | Tektro TKD173 four-piston hydraulic disc brakes; Tektro TR180-61E 180mm rotors, 2.3mm thick, with Avinox tonewheel (AMFLOW specifications). |
| Wheels and rims | Amflow HTA-25, 27.5-inch front and rear; alloy rims, 25mm internal width, 32 holes (AMFLOW specifications). |
| Hubs and axles | Front 15 × 110mm; rear 12 × 148mm; 6-bolt hubs, 32 holes; rear HG freehub with six pawls (AMFLOW specifications). |
| Tyres | Maxxis Crossmark II, 27.5 × 2.35, wire bead/clincher, EXO, 60TPI; no supported tubeless conversion of the original wheelset (AMFLOW specifications, AMFLOW FAQ). |
| Handlebar and grips | Amflow Touring handlebar, 93mm rise, 35mm diameter; 720mm width S/M or 740mm L/XL; Amflow Enduro Grip 2 (AMFLOW specifications). |
| Listed stem | Amflow Touring Bike Split Stem, 35mm clamp, 35mm length, 0° angle; see sizing notes for the alternative stem supplied for fit adjustment (AMFLOW specifications, AMFLOW FAQ). |
| Saddle and seatpost | Amflow Touring saddle; Amflow TA dropper, 31.6mm diameter; 150mm travel S/M or 170mm L/XL; travel-reduction settings 0/−10/−20mm (AMFLOW specifications). |
| Standard equipment | Avinox front light; Sate-lite M8 rear light with reflector; MIK HD-compatible touring rear rack; front/rear mudguards; 348mm touring kickstand; Elite MTB pedals; bottle cage; battery keys and torque wrench (AMFLOW specifications). |
| Equipped bike weight | S/M 25.52kg; L/XL 25.95kg, with normal manufacturing/configuration variation (AMFLOW FAQ). |
| Load limits | Approximately 200kg total system weight including bike, rider and rack loads; rider maximum 125kg; optional front rack maximum 20kg; rear rack maximum 27kg; lower off-road total-weight limit applies (AMFLOW FAQ). |
Amflow uses two frame groups with different stem configurations: S/M and L/XL; the shorter stem corresponds to S or L and the supplied longer stem to M or XL (AMFLOW Australia sizing FAQ). The height guide below is a starting point, not a fit guarantee, and the A/B test options on this page are not these sizes (AMFLOW Australia sizing FAQ).
| Reference size | Manufacturer height guide | Frame reach / stack | Wheelbase |
|---|---|---|---|
| S | 155–162cm (size guide) | 375.3 / 628.4mm (geometry) | 1144mm (geometry) |
| M | 162–175cm (size guide) | 375.3 / 628.4mm (geometry) | 1144mm (geometry) |
| L | 175–182cm (size guide) | 412.7 / 653.9mm (geometry) | 1192mm (geometry) |
| XL | 182–190cm (size guide) | 412.7 / 653.9mm (geometry) | 1192mm (geometry) |
Amflow lists a 66.9° head-tube angle, 470mm chainstays and 328mm bottom-bracket height for the standard geometry; wheel conversions change that geometry (AMFLOW Australia geometry, wheel-conversion guidance). Check fit, configuration and carrying requirements before selecting a real bike.
Amflow describes commuting, touring and trail applications, but the fully equipped bike is limited to ASTM Category 2 (AMFLOW Australia overview, riding limits). Category 3 use requires the specified preparation, including removal of the kickstand, mudguards and racks, with suspension properly set up; the stated limits then include 125kg total weight and a 60cm maximum drop, not extreme off-road use (AMFLOW Australia riding limits).
The approximately 200kg figure includes the bike itself, rider and luggage; it is not a 200kg rider allowance or a 200kg cargo payload (AMFLOW Australia load limits). Stay within every applicable limit: 125kg rider maximum, 27kg rear rack, 20kg optional front rack and the total system limit, with the separate lower off-road limit where relevant (AMFLOW Australia load limits).
Amflow measures the RS800 at 4 hours 38 minutes to 80% and 6 hours 3 minutes to 100% using the standard 168W charger (AMFLOW Australia charging FAQ). With a 508W charger, the published figures are 1 hour 36 minutes and 2 hours 25 minutes respectively; that charger is not the 168W unit listed in the standard build, and the measurements were taken indoors at 26°C (AMFLOW Australia charging FAQ, standard equipment).
The frame supports 27.5-inch and 29-inch wheels, but converting both wheels to 29 inches requires removal of the mudguards and racks; a rear-wheel conversion also requires the corresponding wheel-size setting in the app (AMFLOW Australia compatibility FAQ). Trailer use requires a compatible dedicated thru-axle and correct installation, with local restrictions checked before use; it is not a universal, included trailer connection (AMFLOW Australia trailer guidance).
Amflow lists Avinox Ride app connectivity, Apple Find My, compatible Bluetooth heart-rate control and imported GPX/FIT/TCX routes (AMFLOW Australia smart features). Offline navigation currently displays a route track rather than a full offline map, and heart-rate control requires a compatible third-party monitor sold separately (AMFLOW Australia smart features).
Amflow's Australian FAQ states a five-year carbon-frame warranty for the original owner, excluding paint/graphics; transferred ownership has a different limit, and the stated drive-system cover is two years with battery cover limited to two years/up to 500 charge cycles (AMFLOW Australia warranty FAQ). Check the applicable terms, exclusions, third-party component cover and seller documentation for any actual purchase; this demonstration does not create a sale, retailer warranty promise or authorised-dealer claim.
No. This is a non-purchasable eBikeStudio beta demonstration, not an AMFLOW stock listing, quotation or test-ride offer. Actual Australian pricing, availability, supplier configuration and local support have not been confirmed for this store.
